Source: Penn State University
By Dwight Lingenfelter and William S. Curran
Cold nights (<40°F) will reduce activity, particularly for glyphosate, and especially when followed by cool (<55°F) cloudy days. With the cold nights we are experiencing this week and maybe next, wait 2 or 3 days if possible after the nights have warmed before making foliar-applied applications. Here are some reminders to consider for common foliar-applied burndown products.
Remember to use a sufficient rate, which generally ranges from 0.75 lb ae to 1.5 lb ae/acre. The 22 fl. oz rate of Roundup, 24 fl. oz Durango or Touchdown Total or 32 fl. oz rate of Credit, Gly Star, Makaze, Rascal, etc. = 0.75 lb. In general, application alone along with appropriate adjuvants (surfactant + AMS) is best and reducing the carrier volume to 10 gal/acre can increase activity. The AMS or another water softener helps alleviate hard water problems and also can reduce antagonism if tank-mixing with other herbicides such as 2,4-D. Be sure to add the AMS first to the spray tank and agitate before adding the glyphosate. Do not add 28 or 32% UAN or other fluid fertilizers to the spray tank. If the water source has a high pH (8 or greater), consider adding an acidifying agent to the spray solution. Avoid tank mixing with higher-rate (> 0.25 lb) clay-based herbicides (WDG, WG, DF, DG, F) like atrazine, simazine, and metribuzin. Other herbicides such as 2,4-D, dicamba, clopyralid, Balance or Corvus, Resolve or Basis Blend, etc. are OK. Use a clean water source that does not contain soil or other sediment that can reduce glyphosate activity.
Gramoxone SL (Syngenta)
This product contains paraquat and is applied at 2-4 pt per acre for control of emerged weeds. Paraquat is the main alternative to glyphosate for nonselective burndown. Since it is a contact herbicide, apply in 20 gallons of liquid carrier or more and do not use flood jet tips for best results. Use flat fan nozzle tips that produce a uniform spray pattern and thorough coverage. Be sure to include an appropriate nonionic surfactant. Add a triazine herbicide (atrazine, metribuzin, etc.) to Gramoxone to increase burndown activity. Using UAN as a partial carrier will also increase the activity. Use a clean water source that does not contain soil or other sediment that can reduce Gramoxone activity.
Broadleaf only products:
A PGR herbicide that can be applied at 1 pint 7 to 14 days before planting or 3 - 5 days after planting for greater crop safety. Plant corn at least 1.5 inches deep. Use the ester formulations of 2,4-D, instead of the amine. Esters (LV4) are usually more effective under cool conditions, are less water soluble and better on perennial weeds. Also, esters usually penetrate the waxy leaf surface (cuticle) better than amines. 2,4-D will help control a number of emerged winter annuals including marestail.
Dicamba (Clarity/Banvel, others)
A PGR herbicide that can be applied at up to 1 pint per acre on medium and fine textured soils with at least 2.5% organic matter. It can be tank-mixed with 2,4-D, and like 2,4-D, direct contact with corn seeds must be avoided. So plant corn at least 1.5 inches deep and apply 7 to 14 days ahead of planting or delay application until corn is emerging. Dicamba is often necessary for successful alfalfa and/or clover burndown. Not for use with soybeans in Pennsylvania.