Tractor Lines Introduced
By combining Allis and White, AGCO introduces three new tractor lines under the AGCO brand with the familiar bright Allis orange.
The 70 and 85 pto hp LT Series feature a Cummins “B” Series turbo 4-cylinder. The 95-145 pto hp RT Series features the turbo 6-cylinder Cummins “B” Series engine. Both series are available in cab or 2-post ROPS models, and with 2WD or powered front axle.
The 160-225 pto hp DT Series features turbo Cummins “C” Series engines, deluxe cabs, electronic powershift transmissions and powered front axles.
Circle 1 on Reader Service Card or visit www.agcocorp.com.
4WD Tractor Series Broadens
Expanding the Case STX 4WD line, Case IH introduced the STX450 and the STX425.
The STX450, with 450 hp, is equipped with a standard 16-speed full powershift transmission in both wheeled and Quadtrac versions. The STX425, with 425 hp, offers an optional 24-speed fully synchronized manual transmission in the wheeled version or a 16-speed full powershift transmission in both the wheeled and Quadtrac versions.
All STX Series tractors feature full-authority fuel injection engines to monitor and continuously optimize engine performance.
Circle 3 on Reader Service Card or visit www.CaseIH.com.
The 13" Gear Drive Swing-Away portable auger is capable of moving 9,000 bu/hour, according to its manufacturer, Mayrath, Clay Center, KS.
The Flex-Hopper design keeps the low-profile hopper level at all times, regardless of the main auger position. A hydraulic winch system raises and lowers the unit, while the 55-series cv-pto powers the main auger tube and swing-away hopper.
The unit is available in 72', 82', 92' and 102' lengths.
Circle 2 on Reader Service Card or call 800-523-6993.
Disk Ripper Evens The Field
The Earthquake disk ripper shatters hardpan 12-18" deep, mixes crop residue 4-6" deep and smoothes the soil for a level, uniform seedbed, according to Unverferth, Kalida, OH.
The front disk gangs feature 24" shallow-concave blades that cut at an 18° angle for residue sizing and mixing. The 24" rear disk gang blades can be set from 14-16° to meet individual soil surface needs.
Parabolic-style deep-till shanks are set for 4,380 lbs of trip pressure and are adjustable in 1" increments. Shank arms feature 6" lateral movement.
The unit's 7- and 9-shank models have 30" shank spacings, with 24" spacings on the 10-shank model. Winged points are also available for greater shattering action.
Circle 4 on Reader Service Card or call 800-322-6301.
The mid-size 2- and 3-shank subsoilers are built for durability and are competitively priced, according to Brillion, Brillion, WI.
Designed as companions to the 1- and 2-shank subsoilers, the units loosen compacted soil to 21" using a narrow 90" frame design. The welded steel frame double bar allows infinite spacing up to 80" between shanks on a 2-shank model and up to 40" on a 3-shank model.
Both units feature iron shanks with reversible wear strips and 2"-wide points, as well as heavy-duty shank clamps. The 3-shank subsoiler features a choice of standard length or high-clearance shanks.
Circle 5 on Reader Service Card or call 800-409-9749.